Course Project: AT209 Lab 02 Bramor Mission Planning – C3P

I. Introduction

Date: 09/09/2021

C3P is the platform where we plan missions for Bramor. Before we go out to the field, we have to know to use it. The mission planning tells the aircraft where to fly. We have to make sure the home, takeoff, waypoints, rally, parachute, and landing area are set correctly. For the parameters of takeoff, rally, and landing, we must make sure the parameters are correct so the aircraft won’t fly into the obstacles.

II. Mission Planner

Figure 1: Altitude: 125 m 
Figure 2: GSD: 2.5 cm/pixel
Figure 3: Wind speed and direction: 5 m/s, 300 degree         
Figure 4: Wind speed and direction: 10 m/s, 194 degree
Figure 5: Flight simulation in progress. Grey rectangles represent the area where the pictures were taken.
Figure 6: Flight Summary

III. Additional Information

Leave a Reply

Your email address will not be published. Required fields are marked *