Course Project: AT272 Lab 08 Remake Wing Ribs
I. Intro Date: 10/23/2023 We were remaking the wing ribs because the oven wasn’t set correctly causing the...
Course Project: AT272 Lab 07: Trailing Edge Ribs
I. Intro Date: 10/16/2023 This time we were making trailing edge ribs. We used a computer software to...
Course Project: AT272 Lab 06 Leading Edge and Trailing Edge
I. Intro Date: 10/02/2023 This time we were making leading edge and trailing. We added an extra rubber...
Course Project: AT272 Lab 05 Left and Right Nose Ribs
I. Intro Date: 09/25/2023 This time we were making left and right nose ribs with water-based release. The...
Course Project: AT272 Lab 04 Wing Rib
I. Intro Date: 09/18/2023 This time we were making left and right wing ribs with water-based release. II....
Course Project: AT272 Lab 03 Making Front and Rear Wing Spar
I. Intro Date: 09/11/2023 Today, we are using two aluminum tools to make front spar and rear spar....
Course Project: AT272 Lab 02 Making Bottom and Top Skins
I. Intro Date: 08/28/2023 In today’s lab, we used two aluminum molds to form the shape of the...
Course Project: AT272 Lab 01 Preparing Pieces with Prepreg Carbon Fiber
I. Intro Date: 08/21/2023 We are going to make a carbon fiber wing section: But before we start...
Course Project: AT20802 Aircraft Materials: Sheet Metal Fabrication
I. Intro Date: Jan. – April 2023 This semester, we learned about sheet metal fabrication and built a...
Course Project: AT20501 Statics For Aerostructures: Straw Bridge
I. Intro Date: Aug. – Nov. 2022 The pressure was built before I took this course. I was...