Course Project: AT272 Lab 11 Final Assembly
I. Intro Date: 11/20/2023 On this day, we did the final assembly. II. Procedure Date: 12/04/2023 On this...
Course Project: AT272 LAB 10 Frame Assembly
I. Intro Date: 11/13/2023 Today we assembled the frame and cured it. II. Procedure
Course Project: AT272 Lab 09 Trimming and Sanding
I. Intro Date 11/06/2023 We trimmed the trailing edge ribs today, and sanded other parts. II. Procedure
Course Project: AT272 Lab 08 Remake Wing Ribs
I. Intro Date: 10/23/2023 We were remaking the wing ribs because the oven wasn’t set correctly causing the...
Course Project: AT272 Lab 07: Trailing Edge Ribs
I. Intro Date: 10/16/2023 This time we were making trailing edge ribs. We used a computer software to...
Course Project: AT272 Lab 06 Leading Edge and Trailing Edge
I. Intro Date: 10/02/2023 This time we were making leading edge and trailing. We added an extra rubber...
Course Project: AT272 Lab 05 Left and Right Nose Ribs
I. Intro Date: 09/25/2023 This time we were making left and right nose ribs with water-based release. The...
Course Project: AT272 Lab 04 Wing Rib
I. Intro Date: 09/18/2023 This time we were making left and right wing ribs with water-based release. II....
Course Project: AT272 Lab 03 Making Front and Rear Wing Spar
I. Intro Date: 09/11/2023 Today, we are using two aluminum tools to make front spar and rear spar....
Course Project: AT272 Lab 02 Making Bottom and Top Skins
I. Intro Date: 08/28/2023 In today’s lab, we used two aluminum molds to form the shape of the...