Course Project: AT272 Lab 07: Trailing Edge Ribs
I. Intro Date: 10/16/2023 This time we were making trailing edge ribs. We used a computer software to...
Course Project: AT272 Lab 06 Leading Edge and Trailing Edge
I. Intro Date: 10/02/2023 This time we were making leading edge and trailing. We added an extra rubber...
Course Project: AT272 Lab 05 Left and Right Nose Ribs
I. Intro Date: 09/25/2023 This time we were making left and right nose ribs with water-based release. The...
Course Project: AT272 Lab 04 Wing Rib
I. Intro Date: 09/18/2023 This time we were making left and right wing ribs with water-based release. II....
Course Project: AT272 Lab 03 Making Front and Rear Wing Spar
I. Intro Date: 09/11/2023 Today, we are using two aluminum tools to make front spar and rear spar....
Personal Project: Quadcopter Flight Controller with Teensy 4.0, Arduino, and C Language
I. Intro Date: June 23, 2023 – June 29, 2024 I finished the ME375 Control II course during...
Personal Project: Commuting Caster Board (WIP)
I. Intro Date: August 2022 – Present Skateboards are hard to maneuver, countless gaps are trying to tip...
Course Project: AT272 Lab 02 Making Bottom and Top Skins
I. Intro Date: 08/28/2023 In today’s lab, we used two aluminum molds to form the shape of the...
Course Project: AT272 Lab 01 Preparing Pieces with Prepreg Carbon Fiber
I. Intro Date: 08/21/2023 We are going to make a carbon fiber wing section: But before we start...
Personal Project: Using Yunohost to Build a Website
I. Intro Date: July 2023 Before this website was built, I used Yunohost as a test server on...